TARGET RECURVE

Eagle-K H25inch Technology

Heavy, thick and unbreakable is the norm. “Light Weight” is the most important performance feature.
A handle has distinct “performance” characteristics.
Being “thick” and “heavy” while being unbreakable and unbendable is a given standard.
What’s crucial is achieving durability and strength while being “slim” and “light” without breaking or bending.
“Lightness” is the primary essential performance feature, and all subsequent performance aspects exist within this “lightness.”
Unnecessary weight places undue strain on the archer’s body.

It is important to have a “stable shape” and “weight distribution” while the Riser itself is “light”.
It’s a given that adding stabilizers and weights will reduce bow movement and increase stability.
What’s crucial is that the handle itself maintains stability and resistance to movement through its “shape” and “weight distribution” while remaining “light”.
A lighter handle enables greater versatility in stabilizer options, achieving greater effects with less physical burden.

The “S-shaped offset structure” creates a symmetrical shape and optimal balance.
The inherent “asymmetrical” design of the upper window creates weight imbalances in all directions – vertical and horizontal – throughout the handle.
The best solution to eliminate this is to incorporate an “S-shaped” “offset structure” throughout the entire handle.
When supported at its center, the Eagle-K maintains perfect balance not only vertically but also “horizontally”.

The Center rod in the hand eliminates vibration and movement at the root, creating optimal balance and stability.
Why isn’t the center stabilizer mounted at the “center of the handle”? The primary reason is “structural strength”. The grip is the narrowest part of the handle.
By positioning the center stabilizer “within the grip”, unwanted vibrations and movements are eliminated from the “bow’s foundation”.
With the center stabilizer positioned at the bow’s center, it reduces instability during aiming and suppresses “kickback” upon release.

It prevents unexpected accidents not only for beginners but also for top archers.
Recently, there have been incidents of serious hand injuries, not just from beginners’ rest failures, but also from advanced archers missing arrow cracks.
The “reverse-R shape” in the lower window’s rest area, while not preventing all incidents, helps avoid major arrow deflections and potential hand injuries.
The Eagle-K is a handle that is “light” yet “unbreakable”, “stable” and “steady”, and above all, “safe”.

The un-balance created by the Sight mounting is eliminated, creating a stable balance with good controllability.
To counteract the imbalance caused by mounting an extension sight, weights are placed on the opposite side of the handle, enhancing the bow’s stability and controllability.

The line drawn on the rest area above the “Safety Grip” indicates the bow’s horizontal centerline.
Use this centerline as a reference guide when setting up your rest and plunger.

For spine adjustment, the cushion plunger can be moved forward or backward within a “±10mm” range.
The rest can be attached to the plate, allowing you to move the plate while keeping the rest mounted.

The window is kept as wide as possible and the clicker is hidden so as not to obstruct the view.
The upper window features a sharp curve design to maximize the window width. The sight pin remains visible for both short-distance and indoor competitions.
The clicker mounting area is recessed, providing a wider field of view through the window even with the clicker installed.

The center rod is pointed “3 degrees downward” so as not to obstruct the view.
The center stabilizer extending from the grip is set at a “3° downward” angle to prevent interference with aiming, especially beneficial for archers using lower draw weights or lower sight positions.

Adopted a universal system that allows easy adjustment and the sturdiest fixation.
Features the globally standardized “ILF” (International Limb Fitting) system.
Center adjustment range of “±1mm”, offering simple yet secure adjustment and fixation.

It is made purely in Japan, and to guarantee its quality and performance, the production number is stamped on the visible part of the grip.
The Eagle-K is a “100% Made in Japan” handle.
As proof of this guarantee, each handle bears a unique production number stamped visibly through the grip.